ACID TRANSPORT TRAILER –SAND TYRE

Circular shaped shell made of 6mm thick hr steel plate to ASTM a-36 or equivalent, fully welded staggered joints with 2nos of shallow drawn dish heads 8 mm, mounted on heavy duty skid frame. Welding all GMAW(mig welding ) using ACM gas for better bead appearance & penetration/strength. The coating lined with derakane 411-45 laminate system. Three matting, one tissue, gel/wax coating lining material: ‘E’ glass chopped strand mat emulsion bonded 600gsm (2 layers) & 450gsm (one layer ) with derakane 411-45 resin. Shape: Cylindrical Horizontal Medium: Acid/Chemical storage up to 34% HCL Capacity 6000 – 7500 USG Single compartment with baffle plates inside Pipe Lines & Fittings 4” Inlet with ptfe lined BF valve & hammer union 4”Fig 206 thread 4” Discharge manifold with 4” PTFE lined BF valve with end discharge connections each 4” fig 206 female with PTFE lined 4” BF valves. Atmospheric Pressure 2 Hinged type manhole Sand Tyres 24/21 Tianli 16 pr Surface Treatment Sand blasted inside & outside to SA2.5
Circular shaped shell made of 6mm thick hr steel plate to ASTM a-36 or equivalent, fully welded staggered joints with 2nos of shallow drawn dish heads 8 mm, mounted on heavy duty skid frame. Welding all GMAW(mig welding ) using ACM gas for better bead appearance & penetration/strength. The coating lined with derakane 411-45 laminate system. Three matting, one tissue, gel/wax coating lining material: ‘E’ glass chopped strand mat emulsion bonded 600gsm (2 layers) & 450gsm (one layer ) with derakane 411-45 resin. Shape: Cylindrical Horizontal Medium: Acid/Chemical storage up to 34% HCL Capacity 6000 – 7500 USG Single compartment with baffle plates inside Pipe Lines & Fittings 4” Inlet with ptfe lined BF valve & hammer union 4”Fig 206 thread 4” Discharge manifold with 4” PTFE lined BF valve with end discharge connections each 4” fig 206 female with PTFE lined 4” BF valves. Atmospheric Pressure 2 Hinged type manhole Sand Tyres 24/21 Tianli 16 pr Surface Treatment Sand blasted inside & outside to SA2.5
Circular shaped shell made of 6mm thick hr steel plate to ASTM a-36 or equivalent, fully welded staggered joints with 2nos of shallow drawn dish heads 8 mm, mounted on heavy duty skid frame. Welding all GMAW(mig welding ) using ACM gas for better bead appearance & penetration/strength. The coating lined with derakane 411-45 laminate system. Three matting, one tissue, gel/wax coating lining material: ‘E’ glass chopped strand mat emulsion bonded 600gsm (2 layers) & 450gsm (one layer ) with derakane 411-45 resin. Shape: Cylindrical Horizontal Medium: Acid/Chemical storage up to 34% HCL Capacity 6000 – 7500 USG Single compartment with baffle plates inside Pipe Lines & Fittings 4” Inlet with ptfe lined BF valve & hammer union 4”Fig 206 thread 4” Discharge manifold with 4” PTFE lined BF valve with end discharge connections each 4” fig 206 female with PTFE lined 4” BF valves. Atmospheric Pressure 2 Hinged type manhole Sand Tyres 24/21 Tianli 16 pr Surface Treatment Sand blasted inside & outside to SA2.5

Circular shaped shell made of 6mm thick hr steel plate to ASTM a-36 or equivalent, fully welded staggered joints with 2nos of shallow drawn dish heads 8 mm, mounted on heavy duty skid frame. Welding all GMAW(mig welding ) using ACM gas for better bead appearance & penetration/strength. The coating lined with derakane 411-45 laminate system. Three matting, one tissue, gel/wax coating lining material: ‘E’ glass chopped strand mat emulsion bonded 600gsm (2 layers) & 450gsm (one layer ) with derakane 411-45 resin.

Shape: Cylindrical Horizontal

Medium: Acid/Chemical storage up to 34% HCL

Capacity 6000 – 7500 USG

Single compartment with baffle plates inside

Pipe Lines & Fittings

  • 4” Inlet with PTFE lined BF valve & hammer union 4”Fig 206 thread
  • 4” Discharge manifold with 4” PTFE lined BF valve with end discharge connections each 4” fig 206 female with PTFE lined 4” BF valves.

Atmospheric Pressure

2 Hinged type manhole

Sand Tyres 24/21 Tianli 16 pr

Surface Treatment Sand blasted inside & outside to SA2.5

 

Category:

Description

Circular shaped shell made of 6mm thick hr steel plate to ASTM a-36 or equivalent, fully welded staggered joints with 2nos of shallow drawn dish heads 8 mm, mounted on heavy duty skid frame. Welding all GMAW(mig welding ) using ACM gas for better bead appearance & penetration/strength. The coating lined with derakane 411-45 laminate system. Three matting, one tissue, gel/wax coating lining material: ‘E’ glass chopped strand mat emulsion bonded 600gsm (2 layers) & 450gsm (one layer ) with derakane 411-45 resin.

Shape: Cylindrical Horizontal

Medium: Acid/Chemical storage up to 34% HCL

Capacity 6000 – 7500 USG

Single compartment with baffle plates inside

Pipe Lines & Fittings

  • 4” Inlet with PTFE lined BF valve & hammer union 4”Fig 206 thread
  • 4” Discharge manifold with 4” PTFE lined BF valve with end discharge connections each 4” fig 206 female with PTFE lined 4” BF valves.

Atmospheric Pressure

 2 Hinged type manhole 

Sand Tyres 24/21 Tianli 16 pr

Surface Treatment Sand blasted inside & outside to SA2.5

 

Add Comment